Objective To investigate the relationship between the vertical distance from semitendinosus insertion to tibial plateau (S-T) and the physical characteristics of patients, in order to provide reference for incision design to expose the semitendinosus insertion. Methods The patients with ligament injury who underwent primary anterior cruciate ligament reconstruction between January 2022 and December 2022 were selected as the research subjects. The patients’ baseline data were collected, including age, gender, height, and body mass. During reconstruction operation, the S-T was measured. Considering the S-T as the dependent variable and baseline data as the independent variable, multiple linear regression analysis was used to establish a regression equation to determine the possible influencing factors of semitendinosus insertion location. Results According to the selection standard, a total of 214 patients were enrolled, including 156 males and 58 females, aged (27±9) years (14-49 years), with a height of (174.7±6.8) cm (range, 160-196 cm) and a body mass of (73.43±12.35) kg (range, 53-105 kg). The S-T was (56.36±3.61) mm (range, 47-67 mm). The multiple linear regression analysis results showed that the height was positively correlated with S-T (β=0.407, SE=0.055, t=7.543, P<0.001); the regression equation was S-T=?14.701+0.407×height, R2=0.690. ConclusionThere was a linear relationship between the height and semitendinosus insertion. The location of semitendinosus insertion estimated by the formula (S-T=?14.701+0.407×height) is reasonable, which provides a theoretical basis for rapid, accurate, and safe location of semitendinosus insertion and design of surgical incision in clinic.
Objective To study the diagnosis and treatment of the acute medial collateral ligament ruptures of the knee.Methods From August 1998 to August 2003, 87 cases of acute medial collateral ligament ruptures were examined with physical method and MR imaging. Out of them, 35 cases of Ⅰdegree and Ⅱ degree ruptures were treated with non-surgery and 52 cases of Ⅲ degree ruptures were treated surgically. The torn medial collateral ligaments were mended, 21 of which were strengthened with the anterior partial gracilis muscle tendon after the arthroscopy. Results In 35 cases of Ⅰ and Ⅱ degree ruptures, 32 were followed up 13 months on average. According to Lysholm scoring system, the clinical results were classified as excellent or good in 93.7% of the cases. In 52 cases of Ⅲ degree ruptures, 50 were followed up 16 months on average. The excellent or good result was 90%.Conclusion For Ⅰ and Ⅱ degree ruptures, MR imagimg is an important way to definitely- diagnose medial collateral ligament ruptures. Abduction stress test of knee extension shows that the medial direct instability is a main way to definitely diagnose Ⅲ degree ruptures. The results of conservative treatment of Ⅰ degree and Ⅱ degree ruptures are excellent. Surgical therapy are fitfor the cases of Ⅲ degree ruptures.
BJECTIVE: To study the effect of transposition of great adductor muscular tendon pedicled vessels in repairing the medial collateral ligament defect of knee joint. METHODS: From September 1991 to September 1999, on the basis study of applied anatomy, 30 patients with the medial collateral ligament defect were repaired with great adductor muscular tendon transposition pedicled vessels. Among them, there were 28 males and 2 females, aged 26 years in average. RESULTS: Followed up for 17 to 60 months, 93.3% patients reached excellent or good grades. No case fell into the poor grade. CONCLUSION: Because the great adductor muscular tendon is adjacent to the knee joint and similar to the knee ligament, it is appropriate to repair knee ligament. Transposition of the great adductor muscular tendon pedicled vessels is effective in the reconstruction of the medial collateral ligament defect of knee joint.
Objective To compare early graft healing between over-the-top (OTT) and anatomic single-bundle (SB) anterior cruciate ligament (ACL) reconstruction. Methods A clinical data of 40 patients underwent ACL reconstruction, who admitted between June 2021 and October 2022 and met the selective criteria, was retrospectively analyzed. Among them, 20 patients were treated with OTT reconstruction (OTT group) and 20 with SB reconstruction (SB group). There was no significant difference between groups (P>0.05) in the gender, age, affected side, disease duration, degree of meniscus injury, body mass index, and preoperative International Knee Documentation Committee (IKDC) score, Lysholm score, pain visual analogue scale (VAS) score, and KT-2000 measurement. At 3, 6, and 12 months, MRI was performed to measure the signal noise quotient (SNQ) of the proximal end, middle, and distal end of the graft in the two groups, as well as at the corner of the graft with lateral femoral condyle and 1 cm around the femoral fixation point in the OTT group, to observe the degree of graft healing. Before operation and at 3, 6, and 12 months, the knee function and pain were evaluated by IKDC score, Lysholm score, and VAS score. Before operation and at 12 months after operation, the KT-2000 measurement was taken to evaluation the knee joint stability. Results All operations were successfully completed in both groups and the incisions healed by first intention. All patients were followed up 12-15 months (mean, 12.9 months), with no significant difference in the follow-up time between groups (P>0.05). After operation, the IKDC score, VAS score, and Lysholm score improved gradually over time in both groups, with significant differences between different time points (P<0.05). The differences between groups at 3, 6, and 12 months after operation were not significant (P>0.05). The anterior and posterior stability of the knee joint improved significantly in both groups at 12 months after operation, and the difference in KT-2000 measurements was significant when compared with the preoperative value (P<0.05), but the difference of pre- and post-operation between groups was not significant (P>0.05). At 3, 6, and 12 months after operation, MRI showed that the differences in the SNQ of the proximal end and middle of the grafts between the two groups were not significant (P>0.05), and the SNQ of distal end was significantly higher in the SB group than in the OTT group (P<0.05). At each time point, grafts in the OTT group had the highest SNQ at the corner and the lowest at the fixation point, and the differences were significant compared to the other sites (P<0.05). In the two groups, except for the fixation point, the SNQ of the remaining sites were highest at 6 months and lowest at 12 months (P<0.05). In addition, there were significant differences in SNQ between the different sites of grafts (P<0.05), and the SNQ was lowest at proximal end and highest at distal end. At last follow-up, the knee grafts in both groups were in good shape and no graft necrosis or loosening of the internal fixation was observed. Conclusion The knee joint function and graft healing after OTT reconstruction of ACL are similar to those of SB reconstruction, but it should be noted that the healing at the corner of the graft is slower.
Objective To investigate the effectiveness of reconstructing medial patellofemoral l igament with hamstring tendon autografts for the treatment of recurrent patellar dislocation under arthroscopy. Methods Between January 2005 and January 2010, 22 cases of recurrent patellar dislocation were treated by lateral retinacular release and reconstructionof the medial patellofemoral ligament with hamstring tendon autografts under arthroscopy. There were 5 males and 17 females, aged 15-19 years (mean, 17.3 years). The average number of dislocation was 4 (range, 3-8). The main cl inical symptoms were pain and swell ing of knee joint, weakness in the leg, and limited range of motion (ROM). The patellar tilt test, pressing pain of patellofemoral ligament insertion, and apprehension sign showed positive results. According to International Knee Documentation Committee (IKDC) scoring criteria, the subjective IKDC score was 36.7 ± 4.7, and the Lysholm score was 69.3 ± 3.8. X-ray films showed that the patella inclined outwards. Results All incisions healed by first intention. Twenty-two cases were followed up 18-49 months (mean, 34 months). Pain and swelling of knee joint and weakness were improved obviously. No recurrence was found during follow-up. The ROM of knee in flexion and extension was improved when compared with preoperative ROM. The subjective IKDC score was 92.4 ± 5.3 and the Lysholm knee score was 91.7 ± 5.2, showing significant differences when compared with preoperative scores (P lt; 0.05). Conclusion Reconstruction of the medial patellofemoral ligament with hamstring tendon autografts under arthroscopy is an effective method to treat recurrent patellar dislocation.
In the study of oral orthodontics, the dental tissue models play an important role in finite element analysis results. Currently, the commonly used alveolar bone models mainly have two kinds: the uniform and the non-uniform models. The material of the uniform model was defined with the whole alveolar bone, and each mesh element has a uniform mechanical property. While the material of the elements in non-uniform model was differently determined by the Hounsfield unit (HU) value of computed tomography (CT) images where the element was located. To investigate the effects of different alveolar bone models on the biomechanical responses of periodontal ligament (PDL), a clinical patient was chosen as the research object, his mandibular canine, PDL and two kinds of alveolar bone models were constructed, and intrusive force of 1 N and moment of 2 Nmm were exerted on the canine along its root direction, respectively, which were used to analyze the hydrostatic stress and the maximal logarithmic principal strain of PDL under different loads. Research results indicated that the mechanical responses of PDL had been affected by alveolar bone models, no matter the canine translation or rotation. Compared to the uniform model, if the alveolar bone was defined as the non-uniform model, the maximal stress and strain of PDL were decreased by 13.13% and 35.57%, respectively, when the canine translation along its root direction; while the maximal stress and strain of PDL were decreased by 19.55% and 35.64%, respectively, when the canine rotation along its root direction. The uniform alveolar bone model will induce orthodontists to choose a smaller orthodontic force. The non-uniform alveolar bone model can better reflect the differences of bone characteristics in the real alveolar bone, and more conducive to obtain accurate analysis results.
ObjectiveTo conclude the effectiveness of arthroscopy combined with Burks and SchaVer's approach in the treatment of posterior cruciate ligament (PCL) avulsion fractures in a floppy lateral position. MethodsBetween May 2010 and March 2014, 21 patients with PCL avulsion fractures were treated. There were 13 males and 8 females, aged 21 to 62 years (mean, 39.1 years). The causes included traffic accident injury in 10 cases, sports injury in 5 cases, and falling injury from height in 6 cases. The time from injury to hospital was 1-6 days (mean, 2.5 days). The results of posterior drawer test were all positive, and the results of anterior drawer test and lateral stress test were all negative. The Lysholm score was 28.0±5.5 before operation. And the American Orthopaedic Foot and Ankle Society (IKDC) score was 46.2±7.6 before operation. According to Meyer standards for fractures classification, 11 cases were rated as type II and 10 cases as type III. Arthroscopy was used to inspect and treat the intra-articular lesions, then avulsion fracture was fixed by Burks and SchaVer's approach in lateral position. Postoperative functional exercises were performed. ResultsPrimary healing of incision was obtained, without nerve and vascular injury or joint infection. All patients were followed up 18-36 months (mean, 27.2 months). The X-ray films of the knee joint showed good fractures reduction and healing at 3 months after operation. The results of posterior drawer test and reverse Lachman test were negative. The knee range of motion was recovered to normal level. At last follow-up, the Lysholm score of the knee joint was significantly improved to 90.9±1.4 from preoperative one (t=54.584, P=0.000), and the IKDC score was significantly increased to 90.5±5.3 from preoperative one (t=15.638, P=0.000), including 19 cases of grade A and 2 cases of grade B. ConclusionA combination of arthroscopy and Burks and SchaVer's approach for the treatment of PCL avulsion fractures in a floppy lateral position has the advantages of minimal invasion and safe approach, short operative time, and early postoperative rehabilitation exercises, so it can provide satisfactory function recovery of the knee joint.
Objective To review the advances in double-bundle anterior cruciate ligament (ACL) reconstruction in adolescents at home and abroad. Methods Recent literature about double-bundle ACL reconstruction in adolescents at home and abroad was extensively consulted, and the relationship between bone canal and epiphyseal plate, clinical verification of surgical safety, and clinical effectiveness of double-bundle ACL reconstruction in adolescents were summarized and analyzed. Results Double-bundle ACL reconstruction has certain advantages in clinical stability and re-rupture rate when compared with single-bundle ACL reconstruction in adolescents, and there is no significant difference in safety between them. Conclusion Double-bundle ACL reconstruction in adolescents can achieve lower re-rupture rate and better stability when compared with single-bundle reconstruction. However, the sample size of clinical research is too small, and the follow-up time is too short, so the effectiveness needs to be continuously observed.
Objective To simulate anterosuperior instabil ity of the shoulder by a combination of massive irreparable rotator cuff tears and coracoacromial arch disruption in cadaveric specimens, use proximally based conjoined tendon transfer forcoracoacromial l igament (CAL) reconstruction to restrain against superior humeral subluxation, and investigate its feasibility and biomechanics property. Methods Nine donated male-adult and fresh-frozen cadaveric glenohumeral joints were applied to mimic a massive irreparable rotator cuff tear in each shoulder. The integrity of the rotator cuff tendons and morphology of the CAL were visually inspected in the course of specimen preparation. Cal ipers were used to measure the length of the CAL’s length of the medial and the lateral bands, the width of coracoid process and the acromion attachment, and the thickness in the middle, as well as the length, width and thickness of the conjoined tendon and the lateral half of the removed conjoined tendon. The glenohumeral joints were positioned in a combination of 30° extension, 0° abduction and 30° external rotation. The value of anterosuperior humeral head translation was measured after the appl ication of a 50 N axial compressive load to the humeral shaft under 4 sequential scenarios: intact CAL, subperiosteal CAL release, CAL anatomic reattachment, entire CAL excision after lateral half of the proximally based conjoined tendon transfer for CAL reconstruction. Results All specimens had an intact rotator cuff on gross inspection. CAL morphology revealed 1 Y-shaped, 4 quadrangular, and 4 broad l igaments. The length of the medial and lateral bands of the CAL was (28.91 ± 5.56) mm and (31.90 ± 4.21) mm, respectively; the width of coracoid process and acromion attachment of the CAL was (26.80 ± 10.24) mm and (15.86 ± 2.28) mm, respectively; and the thickness of middle part of the CAL was (1.61 ± 0.36) mm. The length, width, and thickness of the proximal part of the proximally based conjoined tendon was (84.91 ± 9.42), (19.74 ± 1.77), and (2.09 ± 0.45) mm, respectively. The length and width of the removed lateral half of the proximally conjoined tendon was (42.67 ± 3.10) mm and (9.89 ± 0.93) mm, respectively. The anterosuperior humeral head translation was intact CAL (8.13 ± 1.99) mm, subperiosteal CAL release (9.68 ± 1.97) mm, CAL anatomic reattachment (8.57 ± 1.97) mm, and the lateral half of the proximally conjoined tendon transfer for CAL reconstruction (8.59 ± 2.06) mm. A significant increase in anterosuperior migration was found after subperiosteal CAL release was compared with intact CAL (P lt; 0.05). The translation after CAL anatomic reattachment and lateral half of the proximally conjoined tendon transfer for CAL reconstruction increased over intact CAL, though no significance was found (P gt; 0.05); when they were compared with subperiosteal CAL release, the migration decreased significantly (P lt; 0.05). The translation of lateral half of the proximally conjoined tendon transfer for CAL reconstruction increased over CAL anatomic reattachment, but no significance was evident (P gt; 0.05). Conclusion The CAL should be preserved or reconstructed as far as possible during subacromial decompression, rotator cuff tears repair, and hemiarthroplasty for patients with massive rotator cuff deficiency. If preservation or the insertion reattachment after subperiosteal release from acromion of the CAL of the CAL is impossible, or CAL is entirely resected becauseof previous operation, the use of the lateral half of the proximally based conjoined tendon transfer for CAL reconstruction isfeasible.
ObjectiveTo compare the strength difference between the interfacial screw and the interfacial screw combined with bone tunnel crossing technology to fix the tibial end of ligament during anterior cruciate ligament (ACL) reconstruction through the biomechanical test.MethodsTwenty fresh frozen pig tibia were randomly divided into two groups (n=10) to prepare ACL reconstruction models. The graft tendons in the experimental group were fixed with interfacial screw combined with bone tunnel crossing technology, and the graft tendons in the control group were fixed with interfacial screw. The two groups of specimens were fixed in the high-frequency dynamic mechanics test system M-3000, and the length change (displacement), ultimate load, and stiffness of graft tendons were measured through the reciprocating test and load-failure test.ResultsThe results of reciprocating test showed that the displacement of the experimental group was (3.06±0.58) mm, and that of the control group was (2.82±0.46) mm, and there was no significant difference between the two groups (t=0.641, P=0.529). The load-failure test results showed that the stiffness of the experimental group and the control group were (95.39±13.63) and (91.38±14.28) N/mm, respectively, with no significant difference (t=1.021, P=0.321). The ultimate load of the experimental group was (743.15±173.96) N, which was significantly higher than that of the control group (574.70±74.43) N (t=2.648, P=0.016).ConclusionIn ACL reconstruction, the fixation strength of tibial end with interface screw combined with bone tunnel crossing technology is obviously better than that of interface screw alone.