Objective To prepare a self-made compound, hemostatic jelly with polylactic acid(PLA), which has the hemostatic and absorbable effect on injured cancellous bone. Methods Two bone defects of 5 mm in diameter and 4 mm in depth were subjected on 20 health rabbits by drilling through their either outside plate of the iliac, and were filled with hemostatic jelly(group A), bone wax(group B) and blank(group C) respectively. Hemostasis were observed and recorded after 1 and 10 minutes. Five specimens were harvested at 2, 4, 8 and 12 weeks postoperatively for histological observation. Results ① Hemostatic effect: Bleeding of injured spongy bone stopped within 10 minutes after the treatment of hemostatic jelly and bone wax, but bleeding of balnk did not stop. Hemostatic jelly and bone wax adhered to bone defects firmly within 10 minutes was after the treatment. ② Absorbable effect: Hemostatic jelly and bone defects have not changed visibly in the first 2 weeks. With histological observation 4 to 8 weeks after the operation, hemastatic jelly was absorbed gradually and replaced by osteogenous tissue. It was absorbed completely after 8 to 12 weeks. Bone wax was not absorbed after 12 weeks, no new bone tissue was observed at bone wax area. The blank was replaced by connective tissue and osteogenous tissue partially after 12 weeks. Conclusion The compound hemostatic jelly manifests both hemostatic and absorbable effects on injured cancellous bone and may substitute for bone wax in clinical application.
Objective To investigate the effect of homograft of marrow mesenchymal stem cells (MSCs) seeded onto poly-L-lactic acid (PLLA)/gelatin on repair of articular cartilage defects. Methods The MSCs derived from36 Qingzilan rabbits, aging 4 to 6 months and weighed 2.5-3.5 kg were cultured in vitroand seeded onto PLLA/gelatin. The MSCs/ PLLA/gelatin composite was cultured and transplanted into full thickness defects on intercondylar fossa. Thirty-six healthy Qingzilan rabbits were made models of cartilage defects in the intercondylar fossa. These rabbits were divided into 3 groups according to the repair materials with 12 in each group: group A, MSCs and PLLA/gelatin complex(MSCs/ PLLA/gelatin); group B, only PLLA/gelatin; and group C, nothing. At 4,8 and 12 weeks after operation, the gross, histological and immunohistochemical observations were made, and grading scales were evaluated. Results At 12 weeks after transplantation, defect was repaired and the structures of the cartilage surface and normal cartilage was in integrity. The defects in group A were repaired by the hylinelike tissue and defects in groups B and C were repaired by the fibrous tissues. Immunohistochemical staining showed that cells in the zones of repaired tissues were larger in size, arranged columnedly, riched in collagen Ⅱ matrix and integrated satisfactorily with native adjacent cartilages and subchondral bones in group A at 12 weeks postoperatively. In gross score, group A(2.75±0.89) was significantly better than group B (4.88±1.25) and group C (7.38±1.18) 12 weeks afteroperation, showing significant differences (P＜0.05); in histological score, group A (3.88±1.36) was better than group B (8.38±1.06) and group C (13.13±1.96), and group B was better than group C, showing significant differences (P＜0.05). Conclusion Transplantation of mesenchymal stem cells seeded onto PLLA/gelatin is a promising way for the treatment of cartilage defects.
Objective To investigate the effect of tissue engineering bone compounded in vitro by nanohydroxyapatite/collagen/ polylactic acid (nHAC/PLA) and recombinant human bone morphogenetic protein 2 (rhBMP-2) in repairing rabbit critical calvarial defects. Methods Forty eight New Zealand rabbits, weighting 2.0-2.5 kg, were made the models of critical cranial defects(15 mm in diameter) and divided into 4 groups randomly. Defects were repaired with autoflank bone in the positive control group; with no implant in the blank control group; with nHAC/PLA in the negative control; and with active nHAC/PLA(AnHAC/PLA) in the experimental group(the average quality of each AnHAC/PLA absorbed rhBMP-2 was 1.431 mg). The reapir results were observed through X-ray,HE dyeing and Masson’s trichrism dyeing after 8 and 16 weeks. Results The difference of bone formation was observed by X-ray block degree of skull defect area at 8 and 16 weeks. In the 8 th week and 16 th week, the radiopacities on cranial defect were 67.21%±2.06% and 86.48%±1.73% in the positive control group； 5.84%±1.92% and 9.48%±2.72% in the blank control group; 19.13%±2.51% and 35.67%±3.28% in the negative control group; and 58.84%±2.55% and 8561%±3.36% in the experimental group. There were significant differences between the negative control and the positive control group, and between the experimental group and the positive control group at 8 weeks(Plt;0.05) . There were significant differences between the negative control and blank group, and between the experiment and the blank group at 8 and 16 weeks(P＜0.05). The histology observation showed that the width of bone trabecula at 16 weeks was more than that at 8 weeks and bone defectwas full of bone tissue in positive control group. The bone defect was full of fibrous tissue at 8 and 16 weeks, and there was no new bone in the blank group. The bone defect was full of remnant material and fibrous tissue in the negative control group. The implanted area was replaced by the new bone at 8 weeks and the new bone was lamellar at 16 weeks in the experimental group; the residual material was less in defect area and there were more osteoblasts surrounding. Conclusion The nHAC/PLA is a good scaffoldmaterial of rhBMP-2 and AnHAC/PLA has agood ability in repairing bone defect. So it is hopeful to be applied in the clnical repair of large bone defect.
【Abstract】 Objective To investigate the manufacture and biocompatibil ity of a bioabsorbable poly-D,L-lactic acid(PDLLA) plate containing rhBMP-2. Methods rhBMP-2 was composited with PDLLA (0.05 mg/plate) through vacuum to repare PDLLA plate containing rhBMP-2. Thirty-two New Zealand rabbits (male or female) weighted (3.0 ± 0.5) kg were used in he study. A 2.5 mm middle ulna osteotomy was made bilaterally. The bones as well as periosteum were removed. The right side of all the animals was experimental side (n=32), was fixed internally by PDLLA plate containing rhBMP-2.The left side of all the animals was control side (n=32), was fixed by common PDLLA plate. After a follow-up of 2, 4, 8 and 12 weeks, the ulnas were examined visually, radiographically, histologically, and by computer graph analysis to compare the biocompatibil ity. Re sults Po rosity of PDLLA plate containing rhBMP-2 was 90%, aperture was 150 μm, tensile strength was higher than 50 MPa, three point flexural strength was higher than 90 MPa and intrinsic viscosity was 1.6 dL/g (chloroform solvent). All animals had a good heal ing 1 or 2 weeks after operation. All the animal’s diet and movement were normal. All the fractures were stable. The plates in the experimental group degraded faster than those in the control group. Relative values of callus density evaluated by X-ray at 2, 4, 8 and 12 weeks after operation in the experimental group were 39.22 ± 2.48, 48.79 ± 1.26, 63.78 ± 1.78 and 78.60 ± 1.25 respectively. Those in the control defects were 33.83 ± 1.13, 41.28 ± 1.25, 55.23 ± 0.68 and 66.54 ± 1.33. At each time point, the experimental side produced better and more trabeculae than the control side did (P ＜ 0.01). Histological examination showed that the newbone formation in the experimental side at 2, 4, 8 and 12 weeks after operation was 0.106% ± 0.015%, 0.292% ± 0.019%, 0.457% ± 0.048% and 0.601% ± 0.037%, while those in the control side was 0, 0.193% ± 0.019%, 0.339% ± 0.029% and 0.574% ± 0.047%respectively. At each time point, the experimental side produced better new bone formation than the control side did (P lt; 0.05). The experimental side showed better compatibil ity between plates and surrounding tissue, faster bone formation, more bone regeneration mass and better medullary canal structure than the control side. Conclusion PDLLA plate containing rhBMP-2 has good biocompatibil ity and osteoinducibil ity to enhance fracture heal ing.
In order to find an ideal biological material to prevent peridural adhesion following laminectomy, 30 rabbits were used as animal model, in each of which 2 defects with a size of 1 cm x 0.5 cm were made following laminectomy of L3, L5 spine. One of the defects was covered extradurally with chitosan, gelatin foam or PLA membrane respectively, while the other defect was exposed as control. All of these animals were sacrificed on the 2nd, 4th, 6th, 8th and 10th week after operation, and the extradural fibrosis and adhesion of every animal were evaluated by gross observation and histological examinations. It was revealed that in the chitosan and PLA membrane groups, the extradural tissue was smooth without thickening and there was no fibrous proliferation or adhesion in the epidural cavity, and that in the chitosan group, the growth of fibroblast was restrained but the growth of the epithelial cells was promoted significantly, thus, wound healing was rapid. In the control group and gelatin foam group, obvious extradural fibrosis and adhesion were observed and the extradural space had almost disappeared. Therefore, it was concluded that the biodegradable PLA membrane and chitosan were both an ideal material in the prevention of postoperative epidural adhesion.
OBJECTIVE To confirm membrane-guided tissue regeneration in the healing course of segmental bone defects and study the mechanism. METHODS Segmental, 1 cm osteoperiosteal defects were produced in both radii of 12 rabbits. One side was covered with hydroxyapatite/polylactic acid(HA/PLA) membrane encapsulated as a tube. The contralateral side served as an untreated control. Healing courses were detected by radiographic and histologic examinations. RESULTS All control sides showed nonunion, whereas there were consistent healing pattern in test sides. CONCLUSION Membrane technique can promote bone regeneration.
ObjectiveTo observe the effect of vascular endothelial growth factor/polylactide-polyethyleneglycol-polylactic acid copolymer/basic fibroblast growth factor (VEGF/PELA/bFGF) mixed microcapsules in promoting the angiogenic differentiation of rat bone marrow mesenchymal stem cells (BMSCs) in vitro. MethodsThe BMSCs were isolated by the method of whole bone marrow adherent, and sub-cultured. The passage 3 BMSCs were identified by Wright-Giemsa staining and flow cytometry, and used for subsequent experiments. VEGF/PELA/bFGF (group A), PELA/bFGF (group B), VEGF/PELA (group C), and PELA (group D) microcapsules were prepared. The biodegradable ability and cytotoxicity of PELA microcapsule were determined, and the slow-released ability of VEGF/PELA/bFGF mixed microcapsules was measured. The passage 3 BMSCs were co-cultured with the extracts of groups A, B, C, and D, separately. At 1, 3, 7, 14, and 20 days after being cultured, the morphological changes of induced BMSCs were recorded. At 21 days, the induced BMSCs were tested for DiI-labeled acetylated low density lipoprotein (Dil-ac-LDL) and FITC-labeled ulex europaeus agglutinin I (FITC-UEA-I) uptake ability. The tube-forming ability of the induced cells on Matrigel was also verified. The differences of the vascularize indexes in nodes, master junctions, master segments, and tot.master segments length in 4 groups were summarized and analyzed. ResultsThe isolated and cultured cells were identified as BMSCs. The degradation time of PELA was more than 20 days. There was no significant effect on cell viability under co-culture conditions. At 20 days, the cumulative release of VEGF in the mixed microcapsules exceeded 95%, and the quantity of bFGF exceeded 80%. The morphology of cells in groups A, B, and C were changed. The cells in groups A and B showed the typical change of cobble-stone morphology. The numbers of double fluorescent labeled cells observed by fluorescence microscope were the most in group A, and decreases from group B and group C, with the lowest in group D. The cells in groups A and B formed a grid-like structure on Matrigel. Quantitative analysis showed that the differences in the number of nodes, master junctions, master segments, and tot.master segments length between groups A, B and groups C, D were significant (P<0.05). The number of nodes and the tot.master segments length of group A were more than those of group B (P<0.05). There was no significant differences in the number of master junctions and master segments between group A and group B (P>0.05). ConclusionVEGF/PELA/bFGF mixed microcapsules have significantly ability to promote the angiogenic differentiation of rat BMSCs in vitro.
Objective To explore the biocompatibility of poly(lacticacid/glycolic acid/asparagic acid-co-polyethylene glycol) biomaterials (PLGA-ASP-PEG) and biological behaviors of cultured marrow stroml stem cells (MSCs) combined with this new type of scaffold in tissue engineering. Methods The PLGA-ASP-PEG tri-block copolymers were obtained through bulk ringopening copolymerization method.MSCs were isolated from the bone marrow of 4 week old New Zealand rabbits. The 3rdgeneration MSCs were cultured combining with PLGA-ASP-PEG in vitro, while cells cultured in PLGA as control group. The cell adhesion rate and the adhesivepower were examined by conventional precipitation method and micropipette aspiration technique respectively. The morphological features were studied by scanning electron microscope. The proliferation behavior of the cells was analyzed by MTT assay. The cell cycle, proliferation index, DNA index and apoptosis of the cells were detected by flow cytometry. The synthesis of protein and collagen were examined by Coomassie Brilliant Blue dyes and 3H-Proline incorporation test. Results The MSCs adhered and grew well on the surface of the biomaterial PLGA-ASP-PEG. The powers of cell adhesion, proliferation and protein and collagen synthesis of the cells were all significantly higher than those of PLGA group (P＜0.05), but the apoptosis rate was significantly lower than that of PLGA group (P＜0.05). The DNA indexes showed the cells of both PLGA-ASP-PEG group and PLGAgroup were normal diploid cells. Conclusion PLGA-ASP-PEG showedgood biocompatibilityand the biological properties improved greatly compared with the PLGA scaffold materials. These results demonstrated that the promise of PLGAASPPEG canbe used as an ideal scaffold material for construction of tissue engineered bone to restore bone defects in bone tissue engineering．
Objective To study the mechanism of ectopic osteogenesis of nacre/Polylactic acid (N/P) artificial bone combined with allogenic osteoblasts, and to explore the possibility as a scaffold material of bone tissue engineering. Methods The allogenic- osteoblasts seeded onto N/P artificial bone were co-cultured in vivo 1 week.The N/P artificial bone with allogenic osteoblasts were implanted subcutaneously into the left back sites of the New Zealand white rabbits in the experimental group and the simple N/P artificial bone into the right ones in the control group. The complexes were harvested and examined by gross observation, histologic analysis and immunohistochemical investigation 2, 4 and 8 weeks after implantation respectively.Results In experimental group, the osteoid formed after 4 weeks, and the mature bone tissue withbone medullary cavities formed after 8 weeks; but in control group there was nonew bone formation instead of abundant fibrous tissue after 4 weeks, and more fibrous tissue after 8 weeks.Conclusion N/P artificial bone can be used as an optical scaffold material of bone tissue engineering.
ObjectiveTo review the research progress and challenges of poly (L-lactic acid) (PLLA) membrane in preventing tendon adhesion. MethodsThe relevant literature at home and abroad in recent years was extensively searched, covering the mechanism of tendon adhesion formation, the adaptation challenge and balancing strategy of PLLA, the physicochemical modification of PLLA anti-adhesion membrane and its application in tendon anti-adhesion. In this paper, the research progress and modification strategies of PLLA membranes were systematically reviewed from the three dimensions of tissue adaptation, mechanical adaptation, and degradation adaptation. ResultsThe three-dimensional adaptation of PLLA membrane is optimized by combining materials (such as hydroxyapatite, polycaprolactone), structural design (multilayer/gradient membrane), and drug loading (anti-inflammatory drug). The balance between anti-adhesion and pro-healing is achieved, the mechanical adaptation significantly improve, and degradation is achieved (targeting the degradation cycle to 2-4 weeks to cover the tendon repair period). ConclusionIn the future, it is necessary to identify the optimal balance point of three-dimensional fitness, unify the evaluation criteria and solve the degradation side effects through the co-design of physicochemical modification and drug loading system to break through the bottleneck of clinical translation.