Thoracolumbar fractures are common injuries. Accurate diagnosis and classification are of great significance for guiding treatment. Although there are many classification systems, they have not been universally accepted and used to guide clinical practice. Denis classification, load sharing classification, Magerl/AO classification, and Thoracolumbar Injury Classification and Severity Score have a great clinical influence, but they also have some shortcomings. Recently, some new classifications of thoracolumbar fractures have been proposed, and some of them have been updated and revised, which makes it easy to cause confusion, and puts forward new requirements on how to grasp and apply these classification systems. This article reviews the main and commonly used classification systems of thoracolumbar fractures, discusses the main viewpoints, advantages and disadvantages of each classification system, and looks ahead to the future research direction.
Objective To review current status of surgical treatment for angular kyphosis in spinal tuberculosis and provide reference for clinical treatment. Methods The literature on the surgical treatment for angular kyphosis of spinal tuberculosis in recent years was extensively reviewed and summarized from the aspects of surgical indications, surgical contraindications, surgical approach, selection of osteotomy, and perioperative management. Results Angular kyphosis of spine is a common complication in patients with spinal tuberculosis. If kyphosis progresses gradually, it is easy to cause neurological damage, deterioration, and delayed paralysis, which requires surgical intervention. At present, surgical approaches for angular kyphosis of the spine include anterior approach, posterior approach, and combined anterior and posterior approaches. Anterior approach can be performed for patients with severe spinal cord compression and small kyphotic Cobb angle. Posterior approach can be used for patients with large kyphotic Cobb angle but not serious neurological impairment. A combined anterior and posterior approaches is an option for spinal canal decompression and orthosis. Osteotomy for kyphotic deformity include Smith-Peterson osteotomy (SPO), pedicle subtraction osteotomy (PSO), vertebral column resection(VCR), vertebral column decancellation (VCD), posterior vertebral column resection (PVCR), deformed complex vertebral osteotomy (DCVO), and Y-shaped osteotomy. SPO and PSO are osteotomy methods with relatively low surgical difficulty and low surgical risks, and can provide 15°-30° angular kyphosis correction effect. VCR or PVCR is a representative method of osteotomy and correction. The kyphosis correction can reach 50° and is suitable for patients with severe angular kyphosis. VCD, DCVO, and Y-shaped osteotomy are emerging surgical techniques in recent years. Compared with VCR, the surgical risks are lower and the treatment effects also improve to varying degrees. Postoperative recovery is also a very important part of the perioperative period and should be taken seriously. Conclusion There is no consensus on the choice of surgical treatment for angular kyphosis in spinal tuberculosis. Osteotomy surgery are invasive, which is a problem that colleagues have always been concerned about. It is best to choose a surgical method with less trauma while ensuring the effectiveness.
Objective To investigate the feasibility, effectiveness, and security of percutaneous endoscopic spine surgery for treatment of lumbar spine disorders with intraspinal ossification. Methods Between July 2008 and June 2016, 96 patients with lumbar spine disorders (lumbar disc herniation or lumbar spinal stenosis) with intraspinal ossification were treated with percutaneous endoscopic spine surgery. There were 59 males and 37 females, aged from 13 to 57 years (mean, 29.5 years). The disease duration was 3-51 months (mean, 18.2 months). Fifty-one cases had trauma history. Ninety-two cases were single segmental unilateral symptom, 4 cases were bilateral symptom. The ossification property was posterior ring apophysis separation in 89 cases, and ossification of the fibrous ring or posterior longitudinal ligament in 7 cases. There were 32 cases of lateral type, 13 cases of central type, and 51 cases of mixed type. The pressure factors, such as nucleus pulposus, hyperplasia of the yellow ligament, joint capsule, or articular osteophyma, were removed under the microscope. Local anesthesia or continuous epidural anesthesia was performed in the transforaminal approach with 50 cases, and continuous epidural anesthesia or general anesthesia was performed in the interlaminar approach with 46 cases. The visual analogue scale (VAS) score was used to evaluate the degree of leg pain preoperatively and at last follow-up. The effectiveness was evaluated at last follow-up according to the modified Macnab criteria. Results All patients were successfully operated. Via transforaminal approach, the mean operation time was 53 minutes and the mean intraoperative fluoroscopy times was 8 times; and via interlaminar approach was 58 minutes and 3 times, respectively. The mean bed rest time after operation was 6.5 hours and the mean hospitalization time was 4.7 days. All patients were followed up 6-18 months (median, 11 months). Postoperative lumbar CT scan and three-dimensional reconstruction after 3 days of operation showed that ossification tissues of 26 cases were not resected, 12 cases were resected partly, and 49 cases were resected completely. Postoperative lumbar MRI after 3 months of operation showed that spinal cord and nerve root were not compressed. At last follow-up, VAS score of leg pain was 0.7±1.1, which was significantly lower than preoperative score (5.8±1.1) (t=1.987, P=0.025). At last follow-up, according to modified Macnab criteria, the results were excellent in 87 cases, good in 5 cases, and fair in 4 cases, and the excellent and good rate was 95.8%. Conclusion Percutaneous endoscopic spine surgery for treatment of lumbar spine disorders with intraspinal ossification is an effective, safe, and minimal invasive alternative, and the short-term effectiveness is reliable. Accounting for the treatment of intraspinal ossification, comprehensive analysis should be made by combining clinical symptoms, imaging characteristics, and risk assessment.
Traditional bone repair materials, such as titanium, polyetheretherketone, and calcium phosphate, exhibit limitations, including poor biocompatibility and incongruent mechanical properties. In contrast, ceramic-polymer composite materials combine the robust mechanical strength of ceramics with the flexibility of polymers, resulting in enhanced biocompatibility and mechanical performance. In recent years, researchers worldwide have conducted extensive studies to develop innovative composite materials and manufacturing processes, with the aim of enhancing the bone repair capabilities of implants. This article provides a comprehensive overview of the advancements in ceramic-polymer composite materials, as well as in 3D printing and surface modification techniques for composite materials, with the objective of offering valuable insights to improve and facilitate the clinical application of ceramic-polymer composite materials in the future.
ObjectiveTo evaluate the effectivity and safety of posterior osteotomy for thoracolumbar stress fracture in ankylosing spondylitis (AS) through the gap of a pathological fracture.MethodsBetween April 2012 and August 2015, 8 patients with AS combined with thoracolumbar stress fracture were treated with posterior osteotomy through the gap of a pathological fracture to correct the kyphosis. There were 7 males and 1 female, with an average age of 51 years (range, 37-74 years). The history of AS was 1-40 years (mean, 21.7 years) and disease duration of stress fracture was 2-60 months (mean, 18.5 months). The segmental lesions included T8, 9 in 1 case, T10, 11 in 2 cases, T11 in 2 cases, T12, L1 in 1 case, L1, 2 in 1 case, and L2, 3 in 1 case. The nerve function before operation according to Frankel grading was grade D in 3 cases and grade E in 5 cases. The pre- and post-operative X-ray films, CT three-dimensional reconstruction, and MRI were collected to measure the global kyphosis (GK), local kyphosis (LK), angle of the fusion levels (AFL), pelvic incidence (PI), pelvic tilt (PT), and sagittal vertical axis (SVA). Visual analogue scale (VAS) score was used to assess the back pain intensity.ResultsThe operation time was 210-320 minutes (mean, 267 minutes), and the intraoperative blood loss was 400-2 000 mL (mean, 963 mL). Cerebrospinal fluid leakage was found in 3 patients, and the wound healed by removal of drainage tube and suturing drainage outlet after 5-7 days of operation. The wounds of the rest patients healed by first intention. Lower extremity numbness occurred in 1 case and recovered after 1 month of postoperative administration of oral mecobalamin. All the patients were followed up 20-43 months (mean, 28.4 months). No internal fixator loosening, fracture, and other complications occurred. All the fractures healed with the healing time of 3-12 months (mean, 6.8 months). At 3 months after operation, 3 cases with spinal cord injury of preoperative Frankel grade D recovered to grade E. The GK, LK, AFL, PI, PT, SVA, and VAS scores at 1 week after operation and at last follow-up were significantly improved when compared with preoperative ones (P<0.05). Except for VAS score at last follow-up was significantly improved when compared with that at 1 week after operation (P<0.05), there was no significant difference in the other indexes between at 1 week after operation and at last follow-up (P>0.05).ConclusionPosterior osteotomy through the gap of a pathological fracture is a safe and effective surgical procedure for kyphosis correction and relief of back pain in AS patients combined with thoracolumbar stress fracture. Successful bony fusion and good clinical outcomes can also be achieved by this surgical procedure.
ObjectiveTo evaluate the short-term effectiveness of percutaneous endoscopic lumbar discectomy (PELD) in treatment of buttock pain associated with lumbar disc herniation.MethodsBetween June 2015 and May 2016, 36 patients with buttock pain associated with lumbar disc herniation were treated with PELD. Of 36 cases, 26 were male and 10 were female, aged from 18 to 76 years (mean, 35.6 years). The disease duration ranged from 3 months to 10 years (mean, 14 months). The location of the pain was buttock in 2 cases, buttock and thigh in 6 cases, buttock and the ipsilateral lower extremity in 28 cases. Thirty-four patients had single-level lumbar disc herniation, and the involved segments were L4, 5 in 15 cases and L5, S1 in 19 cases; 2 cases had lumbar disc herniation at both L4, 5 and L5, S1. The preoperative visual analogue scale (VAS) score of buttock pain was 6.1±1.3. VAS score was used to evaluate the degree of buttock pain at 1 month, 3 months, 6 months, and last follow-up postoperatively. The clinical outcome was assessed by the modified MacNab criteria at last follow-up.ResultsAll patients were successfully operated and the operation time was 27-91 minutes (mean, 51 minutes). There was no nerve root injury, dural tear, hematoma formation, or other serious complications. The hospitalization time was 3-8 days (mean, 5.3 days). All incisions healed well and no infection occurred. Patients were followed up 12-24 months (median, 16 months). MRI examination results showed that the dural sac and nerve root compression were sufficiently relieved at 3 months after operation. Patients obtained pain relief after operation. The postoperative VAS scores of buttock pain at 1 month, 3 months, 6 months, and last follow-up were 1.1±0.6, 0.9±0.3, 1.0±0.3, and 0.9±0.4 respectively, showing significant differences when compared with preoperative VAS scores (P<0.05); there was no significant difference in VAS score between the different time points after operation (P>0.05). At last follow-up, according to the modifed MacNab criteria, the results were excellent in 27 cases, good in 9 cases, and fair in 2 cases, and the excellent and good rate was 94.4%.ConclusionPELD can achieve satisfactory short-term results in the treatment of buttock pain associated with lumbar disc herniation and it is a safe and effective minimally invasive surgical technique.
With the development of three-dimensional (3D) printing technology, more and more researches have focused on its application in the region of intervertebral fusion materials; the prospects are worth looking forward to. This article reviews the researches about 3D printing technology in spinal implants, and summarizes the materials and printing technology applied in the field of spinal interbody fusion, and the shortcomings in the current research and application. With the rapid development of 3D printing technology and new materials, more and more 3D printing spinal interbodies will be developed and used clinically.
ObjectiveTo investigate the relationship between O-EA angle and lower cervical curvature in patients with anterior atlantoaxial dislocation undergoing occipitocervical fusion, and to analyze the effect of O-EA angle on lower cervical curvature.MethodsThe clinical data of 61 patients with anterior atlantoaxial dislocation undergoing occipitocervical fusion who were admitted between April 2010 and July 2018 and met the selection criteria were retrospectively analyzed. There were 32 males and 29 females, with an age of 14-76 years (mean, 50.7 years). The fixed segment included 19 cases of C0-C2, 27 cases of C0-C3, 14 cases of C0-C4, and 1 case of C0-C5. The O-EA angle, C2-7 Cobb angle, and T1 tilt angle were measured before operation and at last follow-up. According to the O-EA angle measured at last follow-up, the patients were divided into <95° group (group A), 95°-105° group (group B), and >105° group (group C), and compared the differences of gender, age, fixed segment (short segment was at C3 and above, long segment was beyond C3), and C2-7 Cobb angle. Correlation analysis between the O-EA angle and C2-7 Cobb angle before operation and at last follow-up, as well as the changes of O-EA angle and C2-7 Cobb angle between before operation and at last follow-up were analyzed.ResultsAll 61 patients were followed up 12-24 months, with an average of 22.4 months. There was no significant difference in O-EA angle, C2-7 Cobb angle, and T1 tilt angle before operation and at last follow-up (P>0.05). According to the last follow-up O-EA angle grouping, there were 14 cases in group A, 29 cases in group B, and 18 cases in group C. There was no significant difference in age, gender composition, and fixed segment composition among the three groups (P>0.05); the differences in C2-7 Cobb angles among the three groups were significant (P<0.05), groups A, B, and C showed a gradually increasing trend. The O-EA angle was positively correlated with C2-7 Cobb angle before operation and at last follow-up (r=0.572, P=0.000; r=0.618, P=0.000); O-EA angle change at last follow-up was also positively correlated with C2-7 Cobb change (r=0.446, P=0.000).ConclusionThe O-EA angle of patients with anterior atlantoaxial dislocation is positively correlated with C2-7 Cobb angle. Too large O-EA angle should be avoided during occipitocervical fixation, otherwise it may accelerate the degeneration of the lower cervical spine.
Objective To summarize the advances in MRI-based bone quality scoring systems and their clinical applications. Methods A comprehensive literature review was conducted on recent studies related to the MRI-based bone quality scoring system, focusing on measurement methods, influencing factors, and clinical significance. Results Osteoporosis has a high incidence in China, significantly impacting patients’ quality of life and the postoperative outcomes of related orthopedic surgeries. Early identification of osteoporosis holds important clinical significance. In recent years, both domestic and international research has enriched the MRI-based bone quality scoring systems, which includes vertebral bone quality scoring, endplate bone quality scoring, and pedicle bone quality scoring. Compared to the “gold standard” of bone density measurement, dual-energy X-ray absorptiometry, the bone quality scoring systems demonstrate good efficacy in identifying abnormal bone mass and predicting postoperative complications, while being less influenced by degenerative changes in the lumbar spine, indicating its important clinical application value. ConclusionThe MRI-based bone quality scoring systems have good value in clinical applications. However, current studies are mostly retrospective cohort and case-control studies, which carry a risk of bias. The clinical application value needs further clarification through meta-analysis and large-scale prospective studies.
Objective To evaluate the safety and efficacy of the operation performed under the video-assisted thoracoscope to release the anterior part of the spine of the patient with severe adolescent idiopathic scoliosis (AIS). Methods From April 2004 to July 2006, 24 patients with AIS (Illness course, 1.5-9 years; Lenke Ⅰ in 17 patients, Lenke Ⅱ in 7; right scoliosis in 22, left scoliosis in 2), among whom there were 9 males and 15 females, with an average age of 14.7 years (range, 11-21 years) at the time of the operation. Before operation, the thoracic vertebral Cobb anger at the coronal plane was averaged 78.3°(range, 65-125°). All the patients had normal muscle strength and muscle tension in their lower limbs, but 5 of the patients had a decrease of the superficial sensation in their lower limbs. All the patients had a moderately or severely decreased lung reserve function. Under general anesthesia, the patient was placed in the lateral position to set up a work channel for thoracoscopy. The releasing of the thoracic intervertebral space and the confluence of the bone grafts were performed. During Stage Ⅰ or Stage Ⅱ, the orthopedic procedures for the posterior part of the scoliosis spine, the internal fixation, and the confluence ofthe bone grafts were completed. ResultsAll the patients survived the periodof perioperation. During operation, there was a hemorrhage of 50-200 ml, averaged 100 ml, with a postoperative thoracic closely-drained fluid of 100-150 ml. The incision was healed by the first intention. Each patient underwent the releaseof 4-6 intervertebral spaces, with an average of 5.5 spaces released. The average coronal Cobb angle was 45.6°(range, 25-75°). The physiological curvatureat the sagittal plane was normal, with an improved shape of the spine. The follow-up for 3-18 months averaged 9.3 months revealed that the bilateral pulmonary markings were clear, with confluence of the orthopedic segment of the spine. The patients could live and work normally, and had a significantly-improved psychological condition and an active social participation because of their improved appearance. Conclusion The releasing of the anterior part of the spine under the video-assisted thoracoscope can effectively release the adolescent idiopathic scoliosis and improve the flexibility of the spine, with a smaller degree of the surgical wound and a faster and clearer exposure of the spinal column during operation.