ObjectiveTo explore the feasibility of lumbar puncture models based on 3D printing technology for training junior orthopaedic surgeons to find the optimal pedicle screw insertion points.MethodsMimics software was used to design 3D models of lumbar spine with the optimal channels and alternative channels. Then, the printed lumbar spine models, plasticine, and cloth were used to build lumbar puncture models. From January 2018 to June 2019, 43 orthopedic trainees performed simulated operations to search for the insertion points of pedicle screws base on the models. The operations were performed once a day for 10 consecutive days, and the differences in operation scores and operation durations of the trainees among the 10 days were compared.ResultsAll the trainees completed the surgical training operations successfully, and there were significant differences in the operation scores (13.05±2.45, 14.02±3.96, 17.58±3.46, 21.02±2.04, 23.40±4.08, 25.14±3.72, 27.26±6.09, 33.37±4.23, 35.00±4.15, 38.49±1.70; F=340.604, P<0.001) and operation durations [(22.51±4.28), (19.93±4.28), (18.05±2.89), (17.05±1.76), (16.98±1.97), (15.47±1.74), (13.51±1.42), (12.60±2.17), (12.44±1.71), (11.91±1.87) minutes; F=102.359, P<0.001] among the 10 days.ConclusionThe 3D models of lumbar puncture are feasible and repeatable, which can contribute to surgical training.
The incidence of valvular heart disease (VHD) increases with age, and its principal therapy is valve replacement. However, in recent years, the emergence of transcatheter interventions has changed the traditional therapy, making high-risk patients of surgery see dawn of hope. 3D printing technology has developed rapidly since it was applied to the medical field in 1990. Moreover, it has been widely applied in many surgical majors via refined reduction technology. However, the application of 3D printing technology in cardiovascular surgery is still in the preliminary stage, especially in the field of VHD. This article aims to review basic principles of 3D printing technology, its advantages in the therapy of VHD, and its current status of clinical application. Furthermore, this article elaborates current problems and looks forward to the future development direction.
Shear thinning is an ideal feature of bioink because it can reduce the chance of blocking. For extrusion based biological printing, bioink will experience shear force when passing through the biological printer. The shear rate will increase with the increase of extrusion rate, and the apparent viscosity of shear-thinning bioink will decrease, which makes it easier to block, thus achieving the structural fidelity of 3D printing tissue. The manufacturing of complex functional structures in tissue trachea requires the precise placement and coagulation of bioink layer by layer, and the shear-thinning bioink may well meet this requirement. This review focuses on the importance of mechanical properties, classification and preparation methods of shear-thinning bioink, and lists its current application status in 3D printing tissue trachea to discuss the more possibilities and prospects of this biological material in tissue trachea.
According to the needs of CT image evaluation for transapical transcatheter aortic valve replacement (TAVR), 20 clinical questions were proposed by the Delphi method, 15 questions were initially determined, and 12 clinical questions were summarized and determined by domestic experts. PubMed, Web of Science, Wanfang, and CNKI databases were searched by computer to collect the relevant literature from inception to November 2022, and finally 53 studies were included. Based on evidence-based study and evaluation experience, 3 meetings were held to give recommendations for preoperative CT data acquisition method, preoperative imaging evaluation of aortic root, imaging evaluation of transapical approach, preoperative auxiliary guidance of TAVR by CT images combined with 3D printing, and postoperative imaging evaluation of transapical TAVR, hoping to promote the standardized and successful development of transapical TAVR in China.
Objective To assess the application value of 3-dimensional(3D) printing technology in surgical treatment for congenital tracheal stenosis. Methods We retrospectively analyzed the clinical data of preoperative diagnosis, intra-operative decision-making and postoperative follow-up of four children with congenital tracheal stenosis under the guidance of 3D printing in our hospital between February 2013 and May 2014. There were 3 males and 1 female aged 23.0±7.1 months. Among them, two children were with pulmonary artery sling, one with ventricular septal defect, and the other one with tetralogy of Fallot. The airway stenosis was diagnosed preoperatively by chest CT scan and 3D printing tracheal models, and was confirmed by the help of bronchoscopy under anesthesia. During operation the associated cardiac malformation was corrected firstly under extracorporeal circulation followed by tracheal malformation remedy. The design and implementation of tracheal operation plans were guided by the shape and data from 3D printing trachea models. There were two patients with long segment of tracheal stenosis who received slide anastomosis. And the other two patients were characterized with tracheal bronchus, one of which combined ostial stenosis of right bronchial performed extensive slide anastomosis, and the other one performed end to end anastomosis. Results All the children’s preoperative 3D printing trachea models were in accord with bronchoscopy and intra-operative exploration results. Intra-operative bronchoscopy confirmed that all tracheal stenosis cured completely. All anastomotic stomas were of integrity, and all the luminals were fluent. There was no operative death or no serious complication. During 1-2 years follow-up, all patients breathed smoothly and their airways were of patency by postoperative 3D printing trachea model. Conclusion 3D printing can provide a good help to congenital tracheal stenosis in preoperative diagnosis, the design of operation plan, intra-operative decision-making and manipulation, which can improve the operation successful rate of tracheal stenosis.
ObjectiveTo evaluate the clinical value of three-dimensional (3D) printing model in accurate and minimally invasive treatment of double outlet right ventricle (DORV).MethodsFrom August 2018 to August 2019, 35 patients (22 males and 13 females) with DORV aged from 5 months to 17 years were included in the study. Their mean weight was 21.35±8.48 kg. Ten patients who received operations guided by 3D printing model were allocated to a 3D printing model group, and the other 25 patients who received operations without guidance by 3D printing model were allocated to a non-3D printing model group. Preoperative transthoracic echocardiography and CT angiography were performed to observe the location and diameter of ventricular septal defect (VSD), and to confirm the relationship between VSD and double arteries.ResultsThe McGoon index of patients in the 3D printing model group was 1.91±0.70. There was no statistical difference in the size of VSD (13.20±4.57 mm vs. 13.40±5.04 mm, t=?0.612, P=0.555), diameter of the ascending aorta (17.10±2.92 mm vs. 16.90±3.51 mm, t=0.514, P=0.619) or diameter of pulmonary trunk (12.50±5.23 mm vs. 12.90±4.63 mm, t=?1.246, P=0.244) between CT and 3D printing model measurements. The Pearson correlation coefficients were 0.982, 0.943 and 0.975, respectively. The operation time, endotracheal intubation time, ICU stay time and hospital stay time in the 3D printing model group were all shorter than those in the non-3D printing model group (P<0.05).ConclusionThe relationship between VSD and aorta and pulmonary artery can be observed from a 3D perspective by 3D printing technology, which can guide the preoperative surgical plans, assist physicians to make reasonable and effective decisions, shorten intraoperative exploration time and operation time, and decrease the surgery-related risks.
Because of the characteristics such as accurate, efficient and individuation, 3D printing is being widely applied to manufacturing industry, and being gradually expanded into the medical field. Diseases of chest wall is a common type in thoracic surgery, and surgery is a proper treatment to this kind of disease. For the past few years, 3D printing is being gradually applied in surgery of chest wall diseases. The article mainly makes a statement of two parts that including the possibility to apply 3D printing including chest wall reconstruction and chest wall orthopedic, and to analyze the possibility and application prospect of applying 3D printing to the chest wall disease.
Mitral valve disease is the most common cardiac valve disease. The main treatment of mitral valve disease is surgery or interventional therapy. However, as the anatomy of mitral valve is complicated, the operation is particularly difficult. As a result, it requires sophisticated experiences for surgeons. Three-dimensional (3D) printing technology can transform two-dimensional medical images into 3D solid models. So it can provide clear spatial anatomical information and offer safe and personalized treatment for the patients by simulating surgery process. This article reviews the applications of 3D printing technology in the treatment of mitral valve disease.
ObjectiveTo evaluate the clinical value of in vitro fenestration and branch stent repair in the treatment of thoracoabdominal aortic aneurysm in visceral artery area assisted by 3D printing.MethodsThe clinical data of 7 patients with thoracoabdominal aortic aneurysm involving visceral artery at the Department of Vascular Surgery, Shandong Provincial Hospital Affiliated to Shandong First Medical University from March 2016 to May 2019 were analyzed retrospectively. There were 5 males and 2 females with an average age of 70.2±3.9 years. Among them 4 patients had near-renal abdominal aortic aneurysm, 3 had thoracic aortic aneurysm, 4 had asymptomatic aneurysm, 2 had acute symptomatic aneurysm and 1 had threatened rupture of aneurysm. According to the preoperative CT measurement and 3D printing model, fenestration technique was used with Cook Zenith thoracic aortic stents, and branch stents were sewed on the main stents in vitro, and then the stents were modified by beam diameter technique for intracavitary treatment.ResultsAll the 7 patients completed the operation successfully, and a total of 18 branch arteries were reconstructed. The success rate of surgical instrument release was 100.0%. The average operation time was 267.0±38.5 min, the average intraoperative blood loss was 361.0±87.4 mL and the average hospital stay was 16.0±4.2 d. Immediate intraoperative angiography showed that the aneurysms were isolated, and the visceral arteries were unobstructed. Till May 2019, there was no death, stent displacement, stent occlusion, ruptured aneurysm or loss of visceral artery branches. Conclusion3D printing technology can completely copy the shape of human artery, intuitively present the anatomical structure and position of each branch of the artery, so that the fenestration technique is more accurate and the treatment scheme is more optimized.
Congenital tracheal stenosis (CTS) is a rare but potentially life-threatening disease which results in congnital airway lesion. CTS is often associated with cardiovascular anomalies and presented with a wide spectrum of symptoms. CTS has challenged pediatric surgeons for decades. Various classic approaches and new techniques, including computational fluid dynamics, tissue-engineering trachea, and 3D printing have been proposed for diagnosis and treatment of CTS. This review provides a snapshot of the main progress of diagnosis and treatment of CTS.