Research progress on mechanical performance evaluation of artificial intervertebral disc_Journal of Biomedical Engineering

Authors：

LI Rui ^1,2 , WANG Song ³ , LIAO Zhenhua ³ ,  LIU Weiqiang ^1,3

1. Department of Mechanical Engineering, Tsinghua University, Beijing 100084, P.R.China;
2. Graduate School at Shenzhen, Tsinghua University, Shenzhen, Guangdong 518055, P.R.China;
3. Research Institute of Tsinghua University in Shenzhen, Shenzhen, Guangdong 518057, P.R.China;

Corresponding?author：

Keywords：

artificial intervertebral disc; mechanical performance evaluation; static mechanical testing; dynamic mechanical testing; biomechanical testing

DOI：

10.7507/1001-5515.201712014

Video：

Export PDF Favorites Scan Get Citation

Abstract Full text Figures/Tables Video References Cited by

The mechanical properties of artificial intervertebral disc (AID) are related to long-term reliability of prosthesis. There are three testing methods involved in the mechanical performance evaluation of AID based on different tools: the testing method using mechanical simulator, in vitro specimen testing method and finite element analysis method. In this study, the testing standard, testing equipment and materials of AID were firstly introduced. Then, the present status of AID static mechanical properties test (static axial compression, static axial compression-shear), dynamic mechanical properties test (dynamic axial compression, dynamic axial compression-shear), creep and stress relaxation test, device pushout test, core pushout test, subsidence test, etc. were focused on. The experimental techniques using in vitro specimen testing method and testing results of available artificial discs were summarized. The experimental methods and research status of finite element analysis were also summarized. Finally, the research trends of AID mechanical performance evaluation were forecasted. The simulator, load, dynamic cycle, motion mode, specimen and test standard would be important research fields in the future.

Citation： LI Rui, WANG Song, LIAO Zhenhua, LIU Weiqiang. Research progress on mechanical performance evaluation of artificial intervertebral disc. Journal of Biomedical Engineering, 2018, 35(3): 493-500. doi: 10.7507/1001-5515.201712014 Copy

1.	趙占紅, 郭俊明, 賈寶林, 等. 北京某大學在校大學生頸椎健康狀況調查. 保健醫學研究與實踐, 2017, 14(03): 35-37.
2.	李東紅, 高爽, 張瑋, 等. " 動則生陽”理論指導青少年頸型頸椎病的治療. 長春中醫藥大學學報, 2015, 31(2): 313-315.
3.	van Uden S, Silva-Correia J, Oliveira J M, et al. Current strategies for treatment of intervertebral disc degeneration: substitution and regeneration possibilities. Biomaterials research, 2017, 21(1): 22.
4.	Dowdell J, Erwin M, Choma T, et al. Intervertebral disk degeneration and repair. Neurosurgery, 2017, 80(3, S): S46-S54.
5.	Shah A M, Kwon S J, Chan W W, et al. Intervertebral disc degeneration. Germany: Springer International Publishing, 2017.
6.	Tian P, Fu X, Li Z J, et al. Hybrid surgery versus anterior cervical discectomy and fusion for multilevel cervical degenerative disc diseases: a meta-analysis, Scientific Reports, 2015, 5: 13454.
7.	Zhang Yujie, Liang Chengzhen, Tao Yiqing, et al. Cervical total disc replacement is superior to anterior cervical decompression and fusion: a meta-analysis of prospective randomized controlled trials. PLoS One, 2015, 10(3): e0117826.
8.	Menchetti P M. Cervical spine. Germany: Springer International Publishing, 2016: 193-206.
9.	婁紀剛, 劉浩, 李元超, 等. 一種新型人工頸椎間盤置換的生物力學研究. 生物骨科材料與臨床研究, 2016, 13(3): 10-13, 16.
10.	王成燾, 葛世榮, 靳忠民, 等. 骨科植入工程學. 上海: 上海交通大學出版社, 2016: 232.
11.	Fernstr?m U. Arthroplasty with intercorporal endoprothesis in herniated disc and in painful disc. Acta Chir Scand Suppl, 1966, 357: 154-159.
12.	Sengupta D K. Clinical biomechanics of the spine. Spine (Phila Pa 1976), 2017, 42(7, 1): S3.
13.	Shikinami Y, Kawabe Y, Yasukawa K, et al. A biomimetic artificial intervertebral disc system composed of a cubic three-dimensional fabric. Spine J, 2010, 10(2): 141-152.
14.	Food and Drug Administration. American FDA Drugs Database. [2017.12.06]. https://www.accessdata.fda.gov/cdrh_docs/pdf11/p110009b.pdf.
15.	Food and Drug Administration. American FDA Drugs Database. [2017.12.06]. https://www.accessdata.fda.gov/cdrh_docs/pdf10/p100012b.pdf.
16.	Food and Drug Administration. American FDA Drugs Database. [2017.12.06]. https://www.accessdata.fda.gov/cdrh_docs/pdf6/p060018b.pdf.
17.	Food and Drug Administration. American FDA Drugs Database. [2017.12.06]. https://www.accessdata.fda.gov/cdrh_docs/pdf7/p070001b.pdf.
18.	Food and Drug Administration. American FDA Drugs Database. [2017.12.06]. https://www.accessdata.fda.gov/cdrh_docs/pdf10/p100003b.pdf.
19.	Sheng Sunren, Xu Huazi, Wang Yongli, et al. Comparison of cervical spine anatomy in calves, Pigs and humans. PLoS One, 2016, 11(2): e0148610.
20.	李曉輝, 宋躍明, 段宏, 等. 有限元分析方法在山羊第三～第四頸椎前路融合術后生物力學研究中的應用. 中華實驗外科雜志, 2015, 32(7): 1556-1559.
21.	Yamada K, Ito M, Akazawa T, et al. A preclinical large animal study on a novel intervertebral fusion cage covered with high porosity titanium sheets with a triple pore structure used for spinal fusion. Eur Spine J, 2015, 24(11): 2530-2537.
22.	Mayya A, Praveen P, Banerjee A, et al. Splitting fracture in bovine bone using a porosity-based spring network model. Journal of the Royal Society Interface, 2016, 13(124): 1-10.
23.	巴穆登, 艾爾肯?阿木冬, 孟祥玉. 如何構建能較全面模擬人類椎間盤退變性疾病的椎間盤退變實驗動物模型. 中國組織工程研究, 2015, 19(18): 2940-2946.
24.	婁紀剛, 劉浩, 武文杰, 等. 新型人工頸椎間盤山羊模型的建立及其研究. 實用骨科雜志, 2017, 23(05): 426-429.
25.	Daentzer D, Welke B, Hurschler C, et al. In vitro-analysis of kinematics and intradiscal pressures in cervical arthroplasty versus fusion—a biomechanical study in a sheep model with two semi-constrained prosthesis. Biomed Eng Online, 2015, 14(1): 1-15.
26.	廖振華, 劉偉強. 頸椎融合術與非融合術生物力學研究進展. 生物醫學工程學雜志, 2016(01): 171-176.
27.	Bartels R A, Donk R D, Pavlov P, et al. Comparison of biomechanical properties of cervical artificial disc prosthesis: a review. Clinical Neurology&Neurosurgery, 2008, 110(10): 963-967.
28.	Grant M, Epure L M, Salem O, et al. Development of a large animal Long-Term intervertebral disc organ culture model that includes the bony vertebrae for ex vivo studies. Tissue Eng Part C Methods, 2016, 22(7): 636-643.
29.	Tang Shujie. Comparison of posterior versus transforaminal lumbar interbody fusion using finite element analysis. Influence on adjacent segmental degeneration. Saudi Med J, 2015, 36(8): 993-996.
30.	Ganbat D, Kim Y H, Kim K, et al. Effect of mechanical loading on heterotopic ossification in cervical total disc replacement: a three-dimensional finite element analysis. Biomech Model Mechanobiol, 2016, 15(5): 1191-1199.
31.	Welke B, Schwarze M, Hurschler C, et al. In vitro investigation of a new dynamic cervical implant: comparison to spinal fusion and total disc replacement. Eur Spine J, 2016, 25(7): 2247-2254.
32.	Yu Chengcheng, Liu Peng, Huang Dageng, et al. A new cervical artificial disc prosthesis based on physiological curvature of end plate: a finite element analysis. Spine J, 2016, 16(11): 1384-1391.
33.	Shirazi-Adl A I, Schmidt H, Kingma I. Spine loading and deformation-From loading to recovery. J Biomech, 2016, 49(6, SI): 813-816.
34.	D’aprile P. Biomechanics of the spine. Springer International Publishing, 2015: 3-8.
35.	Jaworski ?, Karpiński R. Biomechanics of the human spine. Journal of Technology and Exlpoitation in Mechanical Engineering, 2017, 03(01): 8-12.
36.	Artz N J, Adams M A, Dolan P. Sensorimotor function of the cervical spine in healthy volunteers. Clin Biomech (Bristol, Avon), 2015, 30(3): 260-268.
37.	Trincat S, Edgard-Rosa G, Geneste G, et al. Two-level lumbar total disc replacement: functional outcomes and segmental motion after 4 years. Orthop Traumatol Surg Res, 2015, 101(1): 17-21.
38.	Park C K. Total disc replacement in lumbar degenerative disc diseases. J Korean Neurosurg Soc, 2015, 58(5): 401-411.

1. 趙占紅, 郭俊明, 賈寶林, 等. 北京某大學在校大學生頸椎健康狀況調查. 保健醫學研究與實踐, 2017, 14(03): 35-37.
2. 李東紅, 高爽, 張瑋, 等. " 動則生陽”理論指導青少年頸型頸椎病的治療. 長春中醫藥大學學報, 2015, 31(2): 313-315.
3. van Uden S, Silva-Correia J, Oliveira J M, et al. Current strategies for treatment of intervertebral disc degeneration: substitution and regeneration possibilities. Biomaterials research, 2017, 21(1): 22.
4. Dowdell J, Erwin M, Choma T, et al. Intervertebral disk degeneration and repair. Neurosurgery, 2017, 80(3, S): S46-S54.
5. Shah A M, Kwon S J, Chan W W, et al. Intervertebral disc degeneration. Germany: Springer International Publishing, 2017.
6. Tian P, Fu X, Li Z J, et al. Hybrid surgery versus anterior cervical discectomy and fusion for multilevel cervical degenerative disc diseases: a meta-analysis, Scientific Reports, 2015, 5: 13454.
7. Zhang Yujie, Liang Chengzhen, Tao Yiqing, et al. Cervical total disc replacement is superior to anterior cervical decompression and fusion: a meta-analysis of prospective randomized controlled trials. PLoS One, 2015, 10(3): e0117826.
8. Menchetti P M. Cervical spine. Germany: Springer International Publishing, 2016: 193-206.
9. 婁紀剛, 劉浩, 李元超, 等. 一種新型人工頸椎間盤置換的生物力學研究. 生物骨科材料與臨床研究, 2016, 13(3): 10-13, 16.
10. 王成燾, 葛世榮, 靳忠民, 等. 骨科植入工程學. 上海: 上海交通大學出版社, 2016: 232.
11. Fernstr?m U. Arthroplasty with intercorporal endoprothesis in herniated disc and in painful disc. Acta Chir Scand Suppl, 1966, 357: 154-159.
12. Sengupta D K. Clinical biomechanics of the spine. Spine (Phila Pa 1976), 2017, 42(7, 1): S3.
13. Shikinami Y, Kawabe Y, Yasukawa K, et al. A biomimetic artificial intervertebral disc system composed of a cubic three-dimensional fabric. Spine J, 2010, 10(2): 141-152.
14. Food and Drug Administration. American FDA Drugs Database. [2017.12.06]. https://www.accessdata.fda.gov/cdrh_docs/pdf11/p110009b.pdf.
15. Food and Drug Administration. American FDA Drugs Database. [2017.12.06]. https://www.accessdata.fda.gov/cdrh_docs/pdf10/p100012b.pdf.
16. Food and Drug Administration. American FDA Drugs Database. [2017.12.06]. https://www.accessdata.fda.gov/cdrh_docs/pdf6/p060018b.pdf.
17. Food and Drug Administration. American FDA Drugs Database. [2017.12.06]. https://www.accessdata.fda.gov/cdrh_docs/pdf7/p070001b.pdf.
18. Food and Drug Administration. American FDA Drugs Database. [2017.12.06]. https://www.accessdata.fda.gov/cdrh_docs/pdf10/p100003b.pdf.
19. Sheng Sunren, Xu Huazi, Wang Yongli, et al. Comparison of cervical spine anatomy in calves, Pigs and humans. PLoS One, 2016, 11(2): e0148610.
20. 李曉輝, 宋躍明, 段宏, 等. 有限元分析方法在山羊第三～第四頸椎前路融合術后生物力學研究中的應用. 中華實驗外科雜志, 2015, 32(7): 1556-1559.
21. Yamada K, Ito M, Akazawa T, et al. A preclinical large animal study on a novel intervertebral fusion cage covered with high porosity titanium sheets with a triple pore structure used for spinal fusion. Eur Spine J, 2015, 24(11): 2530-2537.
22. Mayya A, Praveen P, Banerjee A, et al. Splitting fracture in bovine bone using a porosity-based spring network model. Journal of the Royal Society Interface, 2016, 13(124): 1-10.
23. 巴穆登, 艾爾肯?阿木冬, 孟祥玉. 如何構建能較全面模擬人類椎間盤退變性疾病的椎間盤退變實驗動物模型. 中國組織工程研究, 2015, 19(18): 2940-2946.
24. 婁紀剛, 劉浩, 武文杰, 等. 新型人工頸椎間盤山羊模型的建立及其研究. 實用骨科雜志, 2017, 23(05): 426-429.
25. Daentzer D, Welke B, Hurschler C, et al. In vitro-analysis of kinematics and intradiscal pressures in cervical arthroplasty versus fusion—a biomechanical study in a sheep model with two semi-constrained prosthesis. Biomed Eng Online, 2015, 14(1): 1-15.
26. 廖振華, 劉偉強. 頸椎融合術與非融合術生物力學研究進展. 生物醫學工程學雜志, 2016(01): 171-176.
27. Bartels R A, Donk R D, Pavlov P, et al. Comparison of biomechanical properties of cervical artificial disc prosthesis: a review. Clinical Neurology&Neurosurgery, 2008, 110(10): 963-967.
28. Grant M, Epure L M, Salem O, et al. Development of a large animal Long-Term intervertebral disc organ culture model that includes the bony vertebrae for ex vivo studies. Tissue Eng Part C Methods, 2016, 22(7): 636-643.
29. Tang Shujie. Comparison of posterior versus transforaminal lumbar interbody fusion using finite element analysis. Influence on adjacent segmental degeneration. Saudi Med J, 2015, 36(8): 993-996.
30. Ganbat D, Kim Y H, Kim K, et al. Effect of mechanical loading on heterotopic ossification in cervical total disc replacement: a three-dimensional finite element analysis. Biomech Model Mechanobiol, 2016, 15(5): 1191-1199.
31. Welke B, Schwarze M, Hurschler C, et al. In vitro investigation of a new dynamic cervical implant: comparison to spinal fusion and total disc replacement. Eur Spine J, 2016, 25(7): 2247-2254.
32. Yu Chengcheng, Liu Peng, Huang Dageng, et al. A new cervical artificial disc prosthesis based on physiological curvature of end plate: a finite element analysis. Spine J, 2016, 16(11): 1384-1391.
33. Shirazi-Adl A I, Schmidt H, Kingma I. Spine loading and deformation-From loading to recovery. J Biomech, 2016, 49(6, SI): 813-816.
34. D’aprile P. Biomechanics of the spine. Springer International Publishing, 2015: 3-8.
35. Jaworski ?, Karpiński R. Biomechanics of the human spine. Journal of Technology and Exlpoitation in Mechanical Engineering, 2017, 03(01): 8-12.
36. Artz N J, Adams M A, Dolan P. Sensorimotor function of the cervical spine in healthy volunteers. Clin Biomech (Bristol, Avon), 2015, 30(3): 260-268.
37. Trincat S, Edgard-Rosa G, Geneste G, et al. Two-level lumbar total disc replacement: functional outcomes and segmental motion after 4 years. Orthop Traumatol Surg Res, 2015, 101(1): 17-21.
38. Park C K. Total disc replacement in lumbar degenerative disc diseases. J Korean Neurosurg Soc, 2015, 58(5): 401-411.

Previous Article
Research progress on artificial meniscus implants

Journal of Biomedical Engineering

Research progress on mechanical performance evaluation of artificial intervertebral disc

Abstract Full text Figures/Tables Video References Cited by

Previous Article

Format

Content